Power Tools Tips

Cordless Hammer Drills

Remember that these tools are geared for speed and if you are going to use the drill for driving screws as well, switch it into low gear. This will provide you with much more torque and a lot less strain on your motor. (Eric Mook, Lombard Store Manager)

Belt Sanders

When using a variable speed belt sander for stripping paint and varnish, lower the speed to cut down on the heat that is generated. By doing this you will not melt the finish, keeping your belt from clogging and gumming up. (Eric Mook, Lombard Store Manager)

Cordless Impact Drivers

If you do any fastening, especially in steel, you have to try a cordless impact driver. They operate at a much higher speed than most cordless drills, and the torque is considerably greater. (Eric Mook, Lombard Store Manager)

- back -